General installation Guidelines
The Triton Xerophyte Mixer Unit MUST only be
positioned as shown.
The Triton Xerophyte Mixer Unit can be
mounted on a horizontal surface in any
orientation (Fig 6).
When mounting on a vertical surface the
processing unit outlet MUST ALWAYS FACE
DOWNWARD (Fig 7). Failure to position the
unit correctly could result in a significant
reduction in performance.
IMPORTANT
If wall-mounting the Triton Xerophyte Mixer
Unit the outlet MUST always be FACING
DOWNWARDS (Fig 7).
Decide on the position for the Triton
Xerophyte Mixer Unit. Position the Triton
Xerophyte Mixer Unit in a dry, well-ventilated
area.
The Triton Xerophyte Mixer Unit MUST always
be positioned either flat on a suitable surface
or on a wall where there is easy access for
installation and maintenance.
Mark the four locating screw points for the
base. If fixing to a brick wall or a stud partition,
drill and plug the wall (the wall plugs provided
are suitable for most brick walls). Use an
appropriate masonry drill, but if the wall is
plasterboard or a soft building block, you
MUST use suitable wall plugs and an
appropriate drill bit). Secure the Triton
Xerophyte Mixer Unit in position using the 4
screws supplied (Fig 8).
Typical Suitable
Installations
17
Fixing
Screws
(x4
)
Fig 8
Fig 7
Inlets &
Outlets MUST
be FACING
DOWNWARD
Shower
Outlet
Fig 6
Hot &
Cold
Inlets
Ensure sufficient space is left surrounding
the Mixer unit to allow for pipework,
connections and maintenance
Circulation Loop
