Triton T300si, Инструкция по установке и эксплуатации

Страница: 22 / 32

T300si electric shower
0
Purge pin procedure
On the remote pack, unscrew the top and
bottom retaining screws
(fig.0) again and
remove the cover. The purge pin is located on
the remote pack PCB inside the unit
(fig.) .
Pull the pin off its two pins and, in order to store
it for use at a later date, replace it on one of the
pins.
Replacing the remote pack cover
Locate the tags on the cover into the holes on
the backplate and guide into position. Secure
the cover in position with the three retaining
screws.
Switch on the electric supply at the isolating
switch.
Once the installation of the riser rail is complete,
the shower is ready for normal operation.
Fig.