Triton T300si, Инструкция по установке и эксплуатации

Страница: 27 / 32

T300si electric shower
CLeaNiNg The fiLTeR
It is recommended that the filter is periodically
cleaned in order to maintain the performance of
the shower. It is essential that this operation is
carried out by a competent person.
SwItch off the electrIcIty SUPPly at
the MaINS.
The inlet filter is situated inside the solenoid inlet
(fig.) .
To gain access to the filter remove the cover
then disconnect and remove the compression
fitting. Also, depending on the incoming
pipework arrangements, if there is not enough
slack in the pipework, it could mean the removal
of the unit from the wall.
When cleaning the filter, DO NOT use a sharp
object, as it will cause damage. It is preferable to
use an old toothbrush or similar.
Instructions for installers and service engineers only
INSTRUCTIONS FOR INSTALLERS AND SERVICE ENGINEERS ONLY
Inlet
filter
Fig.