16
10
Continued
SECTION
NOTE:
In normal use, it is in order to leave the
water supply permanently on to the shower
unit, but as with most electrical appliances,
the
unit
MUST
be switched off at the isolating
switch when not in use.
To adjust the shower temperature -
Economy and High settings only
• The water temperature is altered by increasing
or decreasing the flow rate of the water
through the shower via the temperature
control
(fig.19).
• After obtaining your showering temperature,
the knob can be left as the normal setting
and should only need altering to compensate
for seasonal changes in ambient water
temperature.
NOTE:
The preferred knob position on ECONOMY
will give a different temperature to the same
position on HIGH.
To decrease the shower temperature
• Turn the temperature control
anti-clockwise
- this will increase the flow of water through
the shower and make the water
colder
.
To increase the shower temperature
• Turn the temperature control
clockwise
-
this will decrease the flow of water through
the shower and make the water
hotter
.
NOTE:
It is advisable that the showering
temperature is satisfactory by testing with your
hand before stepping under the showerhead.
There will always be a time delay of a few
seconds between selecting a flow rate and the
water reaching the stable temperature for that
flow rate.
Fig.19
Temperature
control knob
Hotter
Colder
