15
USER OPERATING INSTRUCTIONS
10
check list
SECTION
A
- Start/Stop
button
Fig.18
Power ‘on’ indicator (red)
B
- Cold
button
C
- Economy
button
D
- High
button
Cold ‘on’
indicator
(blue)
Economy ‘on’
indicator
(blue)
High ‘on’
indicator
(blue)
OPERATING THE SHOWER
-
(fig.18)
• When the electricity supply to the shower is
switched on at the isolating switch, the red
“power”
indicator will light under button
A
.
To start the shower
NOTE:
the shower starts as a default on the
High
heat
setting if the
Start/Stop
button is used.
Button
A
,
B
,
C
or
D
may be pressed to start the
shower.
• Press
A
(Start/Stop) the shower starts on the
High
setting automatically.
• Press
B
(Cold water) the shower will start on
the
Cold
setting.
• Press
C
(Economy heat) the shower will start
on the
Economy
setting.
• Press
D
(High heat) the shower will start on
the
High
setting.
To stop the shower
• The shower can be stopped by pressing
the
start/stop
button. When pressed, the
phased shutdown will begin and water will
cease to flow after a few seconds. When
the start/stop button is pressed water will
continue to flow in order to remove heated
water inside the unit
(see phased shutdown
process, P17)
.
• Water will cease to flow after a few seconds.
• After phased shutdown the unit
MUST
be
isolated via the 45amp-isolating switch.
Cold water setting -
blue indicator on
•
Cold:
The shower will set to Cold. The cold
setting does not provide any heat from the
heater can to the incoming water.
Economy heat setting -
blue indicator on
•
Economy:
The shower will set to Economy,
using only one of the elements within the
heater can.
High heat setting -
blue indicator on
•
High:
The shower will set to Maximum, using
both of the elements within the heater can.
IMPORTANT:
it will take a few seconds for the
temperature to stabilise once changes have been
made.
