Tripp Lite NGI-M05-C1, Руководство пользователя, Страница: 30 / 254

30
5. Basic Settings
5.1. System Settings
5.1.1. System
Management VLAN
To specify a VLAN group which can access the Switch.

The valid VLAN range is from 1 to 4094.

If you want to configure a management VLAN, the management VLAN should
be created first and the management VLAN should have at least one member
port.
Host Name
The hostname is same as the SNMP system name. Its length is up to 64 characters.
The first 16 characters of the hostname will be configured as the CLI prompt.
Notices:
The default Hostname is L2SWITCH
The default DHCP client is disabled
The default Static IP is 192.168.0.254
Subnet Mask is 255.255.255.0
Default Gateway is 0.0.0.0
Management VLAN is 1
5.1.1.1. CLI Configuration
Node Command Description
enable show interface eth0 This command displays the eth0
configurations.
enable configure terminal This command changes the node to
configure node.
configure hostname STRINGS This command sets the system's
network name.
configure interface eth0 This command enters the eth0 interface
node to configure the system IP.
eth0 show This command displays the eth0
configurations.
eth0 ip address A.B.C.D/M This command configures a static IP
and subnet mask for the system.
eth0 ip address default-gateway
A.B.C.D
This command configures the system
default gateway.
eth0 ip dhcp client
(disable|enable|renew|
next_restart)
This command configures a DHCP
client function for the system.
disable : Use a static IP address on the
switch.