Tripp Lite NGI-M05-C1, Руководство пользователя, Страница: 144 / 254

144
6.10.2. Web Configurations
Parameter Description
Loop Detection Settings
State Select this option to enable loop detection on the Switch.
MAC Address
Enter the destination MAC address the probe packets will be
sent to. If the port receives these same packets the port will be
shut down.
Port Select a port on which to configure loop detection protection.
State Select Enable to use the loop detection feature on the Switch.
Recovery State
Select Enable to reactivate the port automatically after the
designated recovery time has passed.
Recovery Time
Specify the recovery time in minutes that the Switch will wait
before reactivating the port. This can be between 1 to 60
minutes.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
Loop Detection Status