Tripp Lite NGI-M05-C1 Скачать руководство пользователя страница 224

Страница: 224 / 254

224

If the Firmware_Version is difference than current firmware version, download the

Firmware_Image_File and upgrade firmware.

If upgrade firmware succeeded and Firmware_Reboot=1, let reboot_flag=1.

If the Global_Configuration_State =1, download the Global_Configuration_File and

upgrade configuration; otherwise, do step 8.

If upgrade configutation succeeded and Global_Configuration_Reboot =1, let

reboot_flag=1.

If the Specific_Configuration_State =1, download the specific configuration file and

upgrade configuration; otherwise do step 10. The naming is “Model_Name _” with

12-bit MAC digits ,example for following is “INS-8648P

_00e04c8196b9.txt

”

If upgrade configutation succeeded and Specific_Configuration_Reboot =1, let

reboot_flag=1.

10.

If reboot_flag=1, save running configuration and reboot the switch; otherwise, wait

24 hours and go back to step 1.

9.2.1.

CLI Configurations

Node

Command

Description

enable

show auto-provision

This command displays the current auto

provision configurations.

configure

auto-provision

This command enters the auto-provision

node.

auto-provision show

This command displays the current auto

provision configurations.

auto-provision active (enable|disable) This command enables/disables the auto

provision function.

auto-provision server-addressIPADDR This command configures the auto

provision server’s IP.

auto-provision protocol (tftp|http|ftp) The command configurations the upgrade

protocol.

auto-provision FTP-user username

STRING password

STRING

The command configurations the username

and password for the FTP server.

auto-provision folder STRING

The command configurations the folder for

the auto provision server.

auto-provision no folder

The command configurations the folder to

default.

auto-provision no FTP-user

The command configurations the username

and password to default.

Содержание NGI-M05-C1































































































































































































































































Результаты поиска

Содержание NGI-M05-C1

Отзывы:

Tripp Lite NGI-M05-C1, Руководство пользователя, Страница: 224 / 254

Результаты поиска

Содержание NGI-M05-C1

Отзывы: