Tripp Lite NGI-M05-C1 Скачать руководство пользователя страница 115

Страница: 115 / 254

115

PVLAN.

CVLAN

- Add the customer VLAN ID into the Circuit sub-option.

If the CVLAN is not defined, the system returns 0.

PORT

- Add the transmit port ID into the Circuit sub-option.

FRAME

- Add the frame ID into the Circuit sub-option.

The frame ID is configured with the CLI command, “dhcp-

options option82 circuit_frame VALUE”. Or GUI Circuit Frame.

SHELF

- Add the shelf ID into the Circuit sub-option.

The shelf ID is configured with the CLI command, “dhcp-

options option82 circuit_shelf VALUE”. Or GUI Circuit Shelf.

SLOT

- Add the slot ID into the Circuit sub-option.

The slot ID is configured with the CLI command, “dhcp-options

option82 circuit_slot VALUE”. Or GUI Circuit Slot.

For Example:

HOSTNAME=L2SWITCH.

SVLAN=44.

CVLAN=32.

Circuit

Form=

RD+%SPACE+Dep%SPACE+%H%SPACE+%PORT+_+%SVLAN+.+%CVLAN

The circuit sub-option result is: RD Department L2SWITCH 1_44.32

6.4.1.

CLI Configurations

Node

Command

Description

enable

show dhcp-options

This command displays the DHCP options

configurations.

enable

configure terminal

This command changes the node to configure

node.

configure dhcp-options option82

(disable|enable)

This command disables / enables the DHCP

option 82on the Switch.

configure dhcp-options option82

circuit_id STRING

This command configures the information of

the circuit ID sub-option.

configure no dhcp-options

option82 circuit_id

This command removes the information of the

circuit ID sub-option.

configure dhcp-options option82

remote_id STRING

This command configures the information of

the remote ID sub-option.

configure no dhcp-options

option82 remote_id

This command removes the information of the

remote ID sub-option.

configure dhcp-options option82

circuit_frame VALUE

This command configures the frame ID for the

circuit sub-option.

configure dhcp-options option82

circuit_shelf VALUE

This command configures the shelf ID for the

circuit sub-option.

configure dhcp-options option82

circuit_slot VALUE

This command configures the slot ID for the

circuit sub-option.

Содержание NGI-M05-C1































































































































































































































































Результаты поиска

Содержание NGI-M05-C1

Отзывы:

Tripp Lite NGI-M05-C1, Руководство пользователя, Страница: 115 / 254

Результаты поиска

Содержание NGI-M05-C1

Отзывы: