Triol AK06-CP, Быстрый старт

Страница: 32 / 35

32 AT.654252.409 ver.1.2
Quickstart manual
For example, to connect a signal to the analog input number 0 of the USP it is
necessary to connect the supplies wires to the 15
th
te24V) and 18
th
terminal(-
24V). Signal wire of the sensor connect to the 16 th « Ain0 (USP) » .
energize the VSD by turning the
circuit breakers «
ON
».
•
go to
«Commissioning» →«In-
puts / Outputs
» → «Analog in-
puts»;
•
switching between the setup
menu of each analog input is
performed using the buttons lo-
cated at the bottom of the
screen;
;
•
select
«Analog input 0 (USP)»;
•
set up the logic of the VSD op-
eration when the signal at the
analog input 0.