Triol AK06-CP, Быстрый старт

Страница: 16 / 35

16 AT.654252.409 ver.1.2
Quickstart manual
VSD function testing
ATTENTION! All personnel must use the product properly and safely
to prevent any injury or any kind of damage.
Motor settings:
To set-up motor parameters in to VSD controller, go to the UMKA controller
menu:
1. «Commissioning» → «Installation parameters» → «Motor» → « Motor
type» .
Set-up type of motor « Asyn-
chronous » ;
Press « Confirm » .
Note: to make the no-load
test set the Asynchronous
type of motor only.
2. « Commissioning »
→
«Installation parameters»
→
«Motor» .
Set-up the rated motor param-
eters according to the motor
nameplate:
•
«Motor Max Frequency», Hz;
•
«Motor Nominal Current», A;
•
«Motor Nominal Voltage»,
V;
•
«Mot or Nominal Fre-
quency», Hz ;
•
«Motor Power Factor»;
•
«Motor Power», kW or HP.