Triol AK06-CP, Быстрый старт

Страница: 10 / 35

10 AT.654252.409 ver.1.2
Quickstart manual
Triol AK06 VSD can be provided with varied input and output parts, as well as
with different enclosure types for indoor and outdoor installation.
1. External light indicator
Green indicator HL1 (OPERATION) is intended for indicating the
VSD ON state. Indicator blinking means that some parameter has
exceeded a threshold value and a countdown to protective
shutdown has begun. If the parameter value becomes normal the
VSD keep running, if not, VSD shuts down;
Yellow indicator HL2 (STANDBY) indicates the VSD OFF state
with a capability of automatic restart. It shows a continuous glow
if some parameter has reached a threshold value. Indicator
blinking i
mproves operator’s awareness of the VSD status and
goes to show that there are no reasons, which may prevent motor
from starting up, and a countdown to automatic restart begins;
Red indicator HL3 (STOP) indicates the VSD OFF state without
any capability of automatic restart;
White indicator HL4 (BACKSPIN) indicates dangerous voltage in
VSD outputs terminals or the presence of motor backspin
rotation voltage at the output terminals. If backspin voltage
becomes less than 60 V AC, HL4 stops lightning;
2. UMKA07 controller with touchscreen display. If UMKA07 complete with
touchscreen only
« START » and « STOP » buttons are active;
3. Emergency button - press this button to stop VSD;
4. The USB port is intended for connecting devices for reading data log to
USB Flash memory, writing manufacturer settings from USB Flash
memory;
5. Frequency potentiometer – allows to set VSD output frequency;
6. Manual/Auto switch – intended to change VSD mode of operation
«Manual» or «Auto» ;
7. Input power circuit breakers handle;
8. Door locks.