Triol AK06-CP, Быстрый старт

Страница: 19 / 35

19
AT.654252.409 ver1.2
AT.654252.409 ver.1.2
Quickstart manual
2. Go to → «Commissioning» → «U/F» → «U/F curve» .
•
set-up voltage and fre-
quency points 4 as the max-
imum motor operation volt-
age and frequency. Voltage
here is the VSD output. Volt-
age can be set equal to sup-
ply voltage;
•
then press parameter
«Straight U/F», the control-
ler automatically trans-
forms the curve in line.
3. Go to «Commissioning» – «Modes of start» and make sure that there is
installed startup mode «Soft» .
Now the VSD is ready for no-load test.
TO START A MOTOR PRESS TO STOP A MOTOR PRESS