Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings Inc., its subsidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
39
Installation Guide for SecureMesh WAN® Gateway 2 - PL-0073A
Chapter 4. Mount the gateway
This chapter describes the steps to mount the GATE-2000 on a pole or tower.
Attach the gateway to a pole or tower
Prepare the mounting location on the pole or tower, then mount the GATE-2000 using
the following instructions as a general guideline. These steps detail the use of Trilliant
part numbers DK-0029A, HM-0242A, and HM-0288A.
1. Mount the extension arm on the utility pole or tower with either bolts or bands
(for concrete poles).
Figure 22:
Typical hardware for mounting the GATE-2000 on a pole or tower
2. Place the Y-shaped, adjustable leveling bracket on the outer end of the
extension arm (see
).
