Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings Inc., its subsidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
52
Installation Guide for SecureMesh WAN® Gateway 2 - PL-0073A
Table 11:
set prov wifi
Command
Description
set prov wifi
Sets the flash Wifi settings. New settings are stored in flash memory, and
require a reboot/power cycle to become active.
Configuration
Description
Interface
Indicates whether the WiFi interface is enabled or disabled.
SSID
Indicates the string of alphanumeric character that specifies the Service Set
IDentifier which can be at most 32 characters long.
PSK
Indicates the string of plain-English passphrase characters that specifies
the Pre-Shared Key which must be between 8 and 63 characters long.
IP address
Indicates the IP address to which the Telnet session must be established
over the WiFi interface in order to access the CLI of the unit.
Subnet mask
Indicates the IP address mask of the WiFi interface.
Gateway
Indicates the IP address of the gateway of the WiFi interface.
Channel
Indicates the channel of the WiFi interface which is a string of numeric
characters in between 1 and 13 inclusively (channels 12 and 13 are region
dependent).
Timeout
Indicates the Telnet client timeout in minutes. 0 indicates timeout feature
disabled.
Synopsis
set prov wifi
