Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings Inc., its subsidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
30
Installation Guide for SecureMesh WAN® Gateway 2 - PL-0073A
Figure 16:
Assembled surge suppressor
11. A second ground wire is required to run from the base of the GATE-2000 to the
same grounding clamp. Trim a second 10 AWG wire to the appropriate length
so that it can connect to the base of the GATE-2000.
12. Attach one end of the ground wire to the grounding clamp.
13. Terminate the GATE-2000 end of the ground wire with another 1/4” size crimp-
on terminal lug or, optionally, strip approximately 3/8” of insulation from the end
(see
).
