Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings Inc., its subsidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
36
Installation Guide for SecureMesh WAN® Gateway 2 - PL-0073A
Figure 20:
Align the locking tab with the notch
25. Then slide the connector body and coupling nut down to engage with the
bulkhead connector. The strain relief should be loose at this point.
26. Turn the coupling nut clockwise to lock the connector in place.
27. After that, tighten the strain relief nut to compress the rubber seal against the
cable.
Note:
The coupling nut should turn approximately 180
degrees, and stop when fully mated.
