EASy IP EAS Network Receiver - Operation Manual
6
How this Manual is Organized
This manual is divided into the following chapters:
•
Chapter 1, “General Information” provides Trilithic contact information and describes how
this Operation Manual is structured.
•
Chapter 2, “Introduction” introduces what the EAS Network Receiver is and what it does.
This chapter discusses the practical application of the Network Receiver. Finally, this
chapter will also explain the connections and LED indicators of the EAS Network Receiver.
•
Chapter 3, “Installation” describes the steps needed to install the EAS Network Receiver.
•
Chapter 4, “Initial Configuration” describes the steps needed to perform the initial
configuration of the EAS Network Receiver.
•
Chapter 5, “Required Encoder/Decoder Setup” describes the steps required to perform
the setup of the EAS Encoder/Decoders using the EASy PLUS Configuration Software to
enable communication from the EAS Network Receiver.
•
Chapter 6, “Network Receiver Management Program” describes how to use the
management program to view and change how the EAS Network Receiver operates.
•
Chapter 7, “Internet Configuration” describes how to access and configure your EAS
Network Receiver using an Internet web browser.
•
Chapter 8, “EAS Network Receiver Deployment” shows a system diagram of the typical
deployment of an EAS Network Receiver.
•
Chapter 9, “Specifications” shows the technical specifications of the EAS Network
Receiver.
