EASy IP EAS Network Receiver - Operation Manual
30
Retrieving a Configuration from Your Network Receiver
You can load a Network Receiver’s configuration parameters into the EAS Network Receiver
Management Program:
•
If more than one PC is used to manage the Network Receivers, this operation can be
performed before changes are made so that the PC configurations reflect the most
recent changes.
•
During troubleshooting, load the configuration to verify that the software reflects the last
programmed configuration.
•
If installing the EAS Network Receiver Management Program on an new PC,
configurations can be updated from the Network Receivers themselves.
Note:
Before retrieving the selected configuration parameters from the
Network Receiver, you must configure your Network Receiver
communication settings for the desired Network Receiver.
To load a Network Receiver’s configuration parameters into the EAS Network Receiver
Management Program, on the
System
tab, select the
Retrieve Configuration
button. A
status window should appear and disappear without reporting any errors.
Uploading Your PC Time to Your Network Receiver
The Network Receiver contains an internal clock that is used in the processing of logs. Verify
that your time zone and time are set correctly on the PC, and then send your PC’s time to your
Network Receiver by selecting the
Upload PC Time
button.
