EASy IP EAS Network Receiver - Operation Manual
42
Modify an Existing Encoder/Decoder in the Contact List
To modify the IP address and UDP port number of an existing encoder/decoder, perform the
following steps:
1. On the
Encoder/Decoders
tab of the software, select the desired encoder/decoder
from the contact list. The selected encoder/decoder’s IP address and UDP port number
will automatically appear in the
IP Address
and
UDP Port
fields.
2. Enter the new IP address or UDP port number in the
IP Address
and
UDP Port
fields,
and then select the
Modify
button. The changes will be reflected in the contact list
below.
