EASy IP EAS Network Receiver - Operation Manual
12
Rear Panel View
The rear panel of the EAS Network Receiver includes the following inputs/outputs for
DECODER 1
and
DECODER 2
:
A.
CH1
- F-Connector antenna input for the channel 1 radio tuner (AM, FM, or NOAA)
B.
CH2
- F-Connector antenna input for the channel 2 radio tuner (AM, FM, or NOAA)
C.
AUDIO CH1
- Three-pin (positive, ground, negative) balanced audio input for the
channel 1 radio tuner
D.
AUDIO CH2
- Three-pin (positive, ground, negative) balanced audio input for the
channel 2 radio tuner
E.
LAN
- RJ-45 connector for a 10/100 base-T Ethernet connection.
F.
RS-232
- 9600 Baud serial interface for performing initial IP address configuration.
G.
AC Power
- US standard grounded power input with user-replaceable 2 Amp, 250 Volt
fast-blow (normal) fuse
Note:
The EAS Network Receiver chassis is capable of housing two
Network Receivers. This allows four radio or baseband audio inputs in a
single chassis. Each Network Receiver in a two unit chassis is
connected and configured separately.
A
B C
D
E F
A
B C
D
E F
G
