Trigon Electronics MiniGuard IID, Инструкции по установке и программированию

Страница: 15 / 17

Page 15
Miniguard IID
[
✽
6] Verify Tamper Code (rrrr
☎
) (
☎ ☎ ☎
= not
set)
[
✽
7] Verify Program Access Code (pppp )
[
✽
8] Verify Site ID Code (iiii
☎
,
☎ ☎ ☎
= not set)
[
✽
9] List all entry Codes. Press {
✽
} to continue,
{##) to stop.
[
✽✽
] List all Phone Numbers. Press {
✽
} to
continue, {##) to stop.
[
✽
#] List Audit Data. Press {
✽
} to continue.
Press {##} to stop.
Remote Operation:
When the unit is called and auto-answers, press [X] to:
[0] Echo Tone Test (Press {#} to stop.)
[1] Memory Test (
☎
= good,
☎ ☎
= bad)
[2] Send Tone Sequence (1 - 9, ], #)
[3] Latch Primary Relay (
☎ ☎
= feature
enabled.
Latch Primary Relay (
☎ ☎ ☎
= error, not
enabled)
[4] Unlatch Primary Relay (
☎ ☎
= feature
enabled.
Unlatch Primary Relay (
☎ ☎ ☎
= error, not
enabled)
[5] Latch Secondary Relay
[6] Unlatch Secondary relay
[7] Force Unit to hang up.
[8] Extend time-out to 3 minutes (30 sec.
Default)
[9] Toggle Sound (
☎
= on,
☎ ☎
= of f)
[
✽
{pppp}] Enter Program Mode (
☎ ☎
= accepted)
[#] Send Site ID Code (iiii,
☎ ☎ ☎
= error, not
set)
Note: Warning tone occurs 10 seconds before auto
hang up.
Program Phone Number(s):
Press [{rrrr
☎
nnn nnnn #}]
Add Entry Code:
Press [#1{eeee}] (
☎ ☎ ☎
= memory full)
Delete Entry Code: [ ]
Press [#2{eeee}] (
☎ ☎ ☎
= already in memory)
Set Clock ( Optional ):
Press [#3{MMDDYhhmmd}] (
☎ ☎
)
Set Primary Relay on/off schedule:
Press [#4{hhmm hhmm d d}] (
☎ ☎
) –start and stop
time, FROM day, and TO day.
Set Secondary Relay on/off schedule ( Optional ):
Press [#5{hhmm hhmm d d}] (
☎ ☎
) –start and stop
time, FROM day, and TO day.
Set Tamper Code:
Press [#6{(rrrr
☎
) (
☎ ☎ ☎
= error)
Set Program Code:
Press [#7{pppp}](
☎ ☎
)
Set Site ID Code:
Press [#8{iiii}](
☎ ☎
)
Erase Mode:
Press [#
✽
{t}], –where 0= all data, 1= Entry Codes,
2= Phone Numbers, 3= Defaults)
Exit Program Mode:
Press [##]
Verify programming:
[
✽
0] Verify Setup Parameters (ssssss
☎
)
[
✽
1] Verify unit capacity (cccc
☎
)
[
✽
2{rrrr}] Verify phone number for Resident Code
rrrr (
☎ ☎ ☎
= none listed)
[
✽
3] Verify Clock (MM-DD-YY-hh-mm-d,
☎ ☎ ☎
= none installed)
[
✽
4] Verify Relay 1 ON time (hhmm hhmm d d
#,
☎ ☎ ☎
= not set)
[
✽
5} Verify Secondary relay schedule