TREVIL 5040 EASYFORM, Инструкция по эксплуатации и обслуживанию

Страница: 9 / 40

50xx Easyform-ed0811
¥
50xx EASYFORM 9
6bar (90PSI) 6bar (90PSI)
1
2
Figure 3.6- Compressed air connectionm (only for models with sleeves tensioning)
WARNING - The connection to the drainage system
must ensure that no leakage of steam or hot water
occurs during the boiler discharge operation
Thermally insulate the discharge pipes.
If necessary, install tanks or devices that allow hot water to cool
before reaching the drainage system.
3.6. Training of the operator
The technician must instruct the operator on how to perform the boil-
er discharge procedure.
The operator must be advised that:
•
during the discharge operation, the boiler expels hot water
mixed to steam;
• the discharge operation can be carried out only if the pressure
in the boiler is below 1 bar;
• the connection of the boiler exhaust to the drainage system
must be kept in good order and must be verified every time
before performing the boiler discharge procedure.
3.7. Compressed air connection (only for
models with sleeves tensioning)
WARNING - The steam connection is to be made by a li-
censed technician only and according to local safety regu-
lations.
Refer to Figure 3.6.
1. Connect the machine to a compressed air source with minimum
pressure 6 bar (90 PSI)
2. Make connections as indicated
3. Set the general pressure regulator on the machine at 6 bar (90
PSI)
WARNING - Do not operate the machine with air pressure
exceeding 6 bar. Risk of damage to the machine.
3.8. Other adjustments
The machine is supplied with the control panel folded against the side
of the the machine cabinet.
Rotate the support of the control panel to bring it in the most
comfortable position.
Figure 3.5 - Water connection
Only machine with boiler
(models 5050-5055-5052-5057)
Installation