TREVIDEA G3Ferrari G10025, Руководство пользователя

Страница: 14 / 20

13
Any cracks of the stones are considered normal and
do not affect the efficiency of the appliance.
The stones become dark after several uses.
DESCRIPTION G10025
1 Temperature light indicator 2 Thermostat control knob
3 Handles 4 Front handles
5 Upper part 6 Refractory stone made cooking plate
7 Lateral supporting pins
TIGELLA MIA by G3FERRARI
The appliance "TIGELLA MIA" by G3Ferrari is designed for cooking tigelle, typical specialties Emilia
Romagna. It can also be used for cooking cakes, snacks, toast, esplanades etc. .The cooking plates are made
of refractory material, specially designed for a better management, always providing the perfect heat
distribution as to ensure the perfect cooking of the tigella.
FIRST USE
- Take the side of supporting pins (7) from the little bag inside the box.
- Screw the side pins (7) in their seats halfway.
- Clean up the cooking plate (6) with a damp cloth.
- Set the appliance by leaving enough space at the sides of the unit.
- Operate the product by rotating the thermostat (2) to position 2 for 15 minutes.
- Turn the knob (2) to the maximum, position for 30 minutes.
This will delete the scraps. For this reason, the appliance may emit some smokes and odors. At this point
"TIGELLA MIA" is ready for operation.
PREHEATING
Preheating takes about 30-40 minutes. For maximum performance and durability of the appliance, it is
important to follow the steps below.
-
Preheat the unit by increasing the temperature gradually, first to position “1” for 15 minutes, then
to position “2” for 15 minutes, to allow the stones to fit in and get warm.
- Set the desired temperature by placing the knob (2) in one of the following positions for another 15
minutes:
* Unit is off
1 Low temperature
2 Medium
2½ High temperature
3 Heat up
When the set temperature has been reached, the control light (1) turns off and the appliance is ready to
cooking. For homemade dough is recommended to position the thermostat at 2½ or 3, for pre-cooked food, it
is recommended position 2.
By turning the thermostat it is always possible to increase and decrease the temperature for slow or fast
cooking.
OPERATING THE UNIT
- Replace the appliance on a flat and stable support, away from heat and flammable materials.
- Move the supporting pins (7) to set the position:
o
Position A : screw the supporting pins (7) until the unit stops, to get more space between the hobs and