Other Features and Settings
57
Access Control Log
To check the operation of the Access Control feature, an
Access Control Log
is provided.
Click the
View Log
button on the
Access Control
screen to view this log.
This log shows attempted Internet accesses which have been
blocked
by the
Access Control
function.
Data shown in this log is as follows:
Date/Time
Date and Time of the attempted access.
Name
If known, the name of the PC whose access was blocked. This
name is taken from the
Network Clients
database
Source IP address
The IP Address of the PC or device whose access request was
blocked
MAC address
The hardware or physical address of the PC or device whose access
request was blocked
Destination
The destination URL or IP address
TW100-BRF114 User’s Guide
58
Remote Management
This feature allows you to manage the TW100-BRF114 via the Internet.
Figure 38: Remote Management Screen
Data - Remote Management Screen
Remote Management
Enable Remote
Management
Enable to allow Management via the Internet. If Disabled, this device
will ignore management connection attempts from the Internet.
Port Number
Enter a port number between 1024 and 65535 (8080 is recom-
mended). This port number must be specified when you connect (see
below).
Note:
The default port number for HTTP (Web) connections is port
80, but using port 80 here will prevent the use of a Web "Virtual
Server" on your LAN. (See
Advanced Internet - Virtual Servers
)
Current
IP Address
You must use this IP Address to connect (see below).
This IP Address is allocated by your ISP. But if using a Dynamic IP
Address, this value can change each time you connect to your ISP.
So it is better if your ISP allocates you a Fixed IP Address.
To connect from a remote PC via the Internet
1.
Ensure your Internet connection is established, and start your Web Browser.
2.
In the "Address" bar, enter "HTTP://" followed by the Internet IP Address of the TW100-
BRF114. If the port number is not 80, the port number is also required. (After the IP Ad-
dress, enter ":" followed by the port number.)
e.g.
HTTP://123.123.123.123:8080
This example assumes the WAN IP Address is 123.123.123.123, and the port number is 8080.
