TRENDnet TI-G160WS, Руководство пользователя, Страница: 117 / 148

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Industrial Managed Switch Series
114
Example:
[DEVICE_NAME]#configure terminal
[DEVICE_NAME](config)#snmp enable
[DEVICE_NAME](config)#snmp community public rw trusted-host
192.168.200.106/24
[DEVICE_NAME](config)#snmp trap-receiver 192.168.200.106 v2c public
[DEVICE_NAME](config)#snmp system-contact IT engineer
[DEVICE_NAME](config)#snmp system-location Branch-Office
Web Configuration
SNMP Setting
Management > SNMP > SNMP > SNMP Settings
Parameter Description
SNMP State
Select Enable to activate SNMP on the Switch.
Select Disable to not use SNMP on the Switch.
System Name
Type a System Name for the Switch.
(The System Name is same as the host name)
System Location Type a System Location for the Switch.
System Contact Type a System Contact for the Switch.
Apply Click Apply to configure the settings.
Refresh Click this button to reset the fields to the last setting.
Community Name
Management > SNMP > SNMP > Community Name
Parameter Description
Community
String
Enter a Community string, this will act as a password for requests
from the management station.
An SNMP community string is a text string that acts as a password.
It is used to authenticate messages that are sent between the
management station (the SNMP manager) and the device (the
SNMP agent). The community string is included in every packet
that is transmitted between the SNMP manager and the SNMP
agent.
Rights
Select Read-Only to allow the SNMP manager using this string to
collect information from the Switch.
Select Read-Write to allow the SNMP manager using this string to
create or edit MIBs (configure settings on the Switch).