TRENDnet TEW-829DRU, Руководство пользователя, Страница: 26 / 117

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-829DRU
19
Virtual LANs (VLANs)
Network > VLAN
Your router supports port-based 802.1Q VLANs as well inter-VLAN routing. VLANs can
be assigned different IP address interfaces in which the router can route be between
VLAN IP subnets.
Create a port-based VLAN
1. Log into your router management page (see “ Access your router management page ”
on page 8).
2. Click on Network and click VLAN.
3. Before assigning which untagged and tagged VLAN member ports are assigned to a
new VLAN, the ports must be set to Off in the default VLAN VID: 1 (LAN). Also, click
the Inter VLAN Routing drop-down list and select Enabled to enable communication
between the LAN and other VLAN interfaces. Click Apply to save and commit the
changes. Example: We will remove ports 5-8 from the default VLAN VID: 1 (LAN)
interface so these ports can be re-assigned as untagged member ports of new VLANs
in example below.
4. To create a new 802.1Q VLAN, under the VLANs section, click Add.
5. Under VID, enter the VLAN ID to assign to the new VLAN (4-4094, VLAN IDs 1-3 are
reserved for use with the default LAN, WAN1, WAN2 interfaces) and set the untagged
VLAN member ports. Example: In the example below, we will create a new VLAN with
VLAN ID: 50 and assign ports 5 & 6 as untagged member ports.
6. Enter the VLAN IP interface configuration under IP Address and Subnet Mask.
Example: In the example below, we will enter the VLAN 50 interface IP address as
192.168.50.1 and subnet mask 255.255.255.0.