HR/JIG
-9-
Positioning Jig on Worktop
n
After choosing which design is required,
locate the pins in the necessary holes.
n
Using two of the pins provided in the relevant
pin holes locate the jig against the front of the
worktop.
n
For repeat slot designs, or custom designs
use the engraved sight lines on the jig to
set the jig to the marked lines drawn on the
worktop. Ensure spacing between each slot is
equal.
n
Secure the jig with clamps, ensure clamps do
not foul router path.
OPERATION
100
200
300
400
300
200
100
= Pin
Clamp
Clamp
Worktop edge
Clamp
100
200
300
400
300
200
100
Worktop edge
= Pin
Ensure jig is lined up at an equal
distance from worktop edge.
Positioning for 90º to Worktop Edge
Positioning for 45º to Worktop Edge
Make trial cuts on waste material
before using jig on actual worktop.
Ensure worktop is held securely
to trestles. Ensure jig is clamped
securely to worktop and placed at a
suitable and comfortable work height.
Ensure working position is
comfortable. Keep proper footing at
all times.
