HR/JIG
-6-
UNIBASE
Sub-base Set
Ref. UNIBASE
To obtain a perfect accurate close fitting joint,
a 30mm guide bush must be used. The guide
bush must always be fitted concentric with the
cutter. This can be achieved using a Universal
Sub-base and 30mm outside diameter guide
bush ref. GB30.
The Universal Sub-base has a central recess
to allow fitting of the guide bush to most makes
of routers and is available ready to fit the most
popular makes.
The Sub-base contains screws, a line up bush
and two line up pins. The line up pins and bush
ensure exact alignment of Sub-base with router
spindle, when fitted with the relevant collet.
Please see Trend catalogue for other sizes
of cove cutter to suit other rod diameters on
the market.
Fits following router models
Atlas Copco
OFSE2000
Bosch
GOF 1300ACE, 1600A,
1700ACE
Casals
FT2000VCE
DeWalt
DW625EK, 629
Draper
R1900V
Elu
MOF 31, 77, 98, 131, 177(E)
Felisatti
TP246(E), R346EC
Festo
OF2000E
Freud
FT2000E
Hitachi
MI12V, M12SA, TR12
Makita
3612BR, 3612(C)
Metabo
OF1612, OFE1812
Performance Pro
CLM1250R
>11/2003, CLM2050R
Ryobi
RE600N, R600N, RE601, R500,
R502
Skil
1875U1
T-TECH
TT/R127
Wadkin
WW
General Instructions for Fitting
Sub-bases to Router
1. Fit line up guide bush onto sub-base, with
screws supplied.
2. Fit 12.7mm (
1
/
2
”) shank line up pin into collet
of router. Plunge router until pin projects
through base and lock plunge.
3. Locate guide bush and sub-base assembly
over protruding pin.
4. Line up fixing holes and fit screws. Now
tighten up screws.
5. Remove line up bush and line up pin.
Alignment should now be correct. Fit 30mm
guide bush and cutter.
6. Periodically check the sub-base is concentric
to the spindle of the router.
Recommended Cove Cutter R6.35mm
for 12.7mmØ Rods
Ref. C054AX1/2TC
Recommended Cove Cutter R6mm
for 12mmØ Rods
Ref. C053CX1/2TC
ACCESSORIES
Please use only Trend original accessories.
C054AX1/2TC
C053CX1/2TC
