Threat Protection System Hardware Specification and Installation Guide
41
Command
Description
Note:
Only cards that are mounted and formatted manually by
the user will be mounted automatically by the device when
it boots. However, after the initial install, any card still
present in the device during subsequent installs will also be
mounted automatically.
user-disk mount
Manually mounts the inserted card.
Note:
Only cards that are mounted and formatted manually by
the user will be mounted automatically by the device when
it boots. However, after the initial install, any card still
present in the device during subsequent installs will also be
mounted automatically.
user-disk unmount
Unmounts the card so that the user can remove it.
user-disk encryption
enable
Encrypts the card if the system master-key has been set. Changing
the encryption status reformats the card and erases all data on the
card.
Note:
Master-key and encryption controls can also be configured
using
System > Settings > Data Security
in the LSM.
For more information, refer to the
Local Security Manager
User Guide
.
user-disk encryption
disable
Disables encryption of the card if the system master-key has been
set. Changing the encryption status reformats the card and erases
all data on the card.
Note:
Master-key and encryption controls can also be configured
using
System > Settings > Data Security
in the LSM.
For more information, refer to the
Local Security Manager
User Guide
.
show user-disk
Shows properties of the card, including operation status and
capacity.
