8
Threat Protection System Hardware Specification and Installation Guide
TippingPoint 440T hardware description
This information describes the components, chassis, requirements, and installation specifics of the
TippingPoint 440T device. The following topics are discussed:
•
Device overview
on page 8
•
Model requirements
on page 12
•
Technical specifications
on page 12
•
Installing the device
on page 13
For information about installing the device, see
Installing the TPS device
on page 21. Prior to installation,
have the
CLI Reference
available for configuration information.
Device overview
The 440T device is a small form-factor device designed for smaller network environments in which traffic
throughput requirements are 500Mbps or less. This model provides the same high-level security protection
as the higher-capacity models.
Chassis Front Panel
The 440T device is a 1U form-factor device that is rack-mountable in a 19-inch rack (or 23-inch rack, with
appropriate conversion parts available from rack accessory vendors).
The following image is a front panel view of a 440T device:
Figure 3. 440T device front panel
1. CFast card
2. 1GB copper ports
3. Dedicated HA port
