24
TRBOnet Swift A200 – User Manual
To configure pins:
In the TRBOnet Dispatch console, click
Administration
and
Radio Systems
in
the left pane (Figure 20, step 1 and 2).
In the right pane, the list of the registered radio systems appears. Double-click
the radio system associated with your A200 gateway (Figure 20, step 3).
In the popup window, click the
Channels
tab. Double-click the channel (Figure
20, step 4), or select it and click
Properties
. Another popup window appears.
In the second popup window, click the
Master Control
tab and configure pins.
Figure 20: Configuring Swift A200 pins in TRBOnet Dispatch Console
Under
Control states
, select the logical input pins that you have mapped in
the configuration of your A200 gateway (Figure 17, page 22). Do not select pin
0. For each selected pin:
Double-click the value in the
Name
field and enter a descriptive pin name.
In the
Value
field, you see the pin states (ON and OFF) and their displayed
values (also ON and OFF by default). If necessary, double-click the value in
the second column and enter a custom name of the pin state.
In the
Status
field, select
Alarm
for the TRBOnet Dispatch Console operator
to see an alarm box when the given pin state is detected.
Under
Commands
, select the logical output pins that you mapped to the
physical pins of your A200 gateway (Figure 17). For each selected pin, specify a
