10
TRBOnet Swift A200 – User Manual
Figure 3: Updating firmware on the A200 gateway connected through USB
To open the configuration of your A200 gateway, click the
Read
button, or
open the
Device
menu and click
Read
.
If you use the LAN connection, the
Read LAN
window appears. Specify the
IP address of your A200 gateway and click
Read
.
If you use the USB connection and the
Select device
window appears, point
your device.
The configuration settings appear in a separate tab.
Click
Network Settings
in the left panel.
Figure 4: Configuring the IP network settings of Swift A200
In the right panel, specify the following settings:
IP Address
: The IP address assigned to your A200 gateway.
Subnet Mask
: The mask of the subnet to which the A200 gateway belongs.
Default Gateway
: The default gateway of the IP network.
MAC Address
: The default network address of the A200 gateway. Modify it
for each A200 gateway to use a unique MAC address on the IP network.
(Optional) If the wireless connection to the radio is required, click
NRF Settings
in the left panel. In the right panel, specify the following NRF connection
settings:
