About TRBOnet Swift A200
3
2.3
Restrictions
1.
Due to changes introduced by Motorola into recent MOTOTRBO firmware, we do
not recommend that you use the
A200 gateway
in the wireless (NRF) mode in
conjunction with MOTOTRBO radios that have firmware version 2.60 and higher.
The latest firmware that can be used in this mode is 2.05.60. The
A200 gateway
can work with newer firmware in the wired (USB) mode.
2.
The
A200 gateway
in the
wireless (NRF)
mode does not support revert channels
and data repeaters. The
A200 gateway
in the
wired (USB)
mode must be used
instead.
3.
We do not recommend to install any Swift IP Gateways in the same subnet as
trunked repeaters (applies to Capacity Plus and Linked Capacity Plus).
2.4
Package Contents
The package contents of TRBOnet Swift A200 include the following items:
Table 1: TRBOnet Swift A200 package contents
Item
Description
Quantity
TRBOnet Swift A200
A radio-over-IP gateway unit with a factory-installed
MicroSD card (4 Gb or more) and a CR1220 battery.
1
TRBOnet Swift Transfer ST002 An option board for a MOTOTRBO radio.
1
Flex cable
A flex cable for connecting the option board to the
main board of a MOTOTRBO radio.
1
Micro-USB <> USB cable
A programming cable.
1
USB <> RADIO cable
A service cable for connecting a MOTOTRBO radio to
the A200 gateway.
1
Audio cable
An audio cable (in and out) for connecting a non-
MOTOTRBO two-way radio to the A200 gateway.
1
Micro-Fit connector system
A Micro-Fit plug and a wire kit for connecting the
A200 gateway to a non-MOTOTRBO two-way radio, a
12V DC power supply, and external hardware.
1
Screw kit
1
Passport
Technical documentation for TRBOnet Swift Agent
A200.
1
