22
TRBOnet Swift A200 – User Manual
4
TRBOnet Configuration
This section describes how to configure TRBOnet software so that the operator could
see and manage the physical I/O pins of the A200 gateway. In the example below, the
A200 gateway is connected to a MOTOTRBO radio through USB and has three input
pins and two output pins connected to external hardware (Figure 16).
Figure 16: Connected I/O pins
In the A200 gateway configuration, the physical I/O pins are mapped to the logical
pins of TRBOnet (Figure 17).
Figure 17: Pin configuration
To complete the I/O pin configuration in TRBOnet, read the following sections:
4.1 TRBOnet Enterprise/PLUS Configuration
(page 23)
4.2 TRBOnet Watch Configuration
(page 26)
