TravRoute CoPilot 2002 Скачать руководство пользователя

Страница: 45 / 56

- 41 -

Trouble-shooting

First things to check:

Are all cables properly secured? Do all components have adequate

power? Does your GPS receiver have a clear view of the sky? (Buildings, mountains and

heavy foliage may block your satellite reception.)

Why can't I get a satellite reading the first time I use CoPilot?

The first time the GPS receiver is used it can take approximately 15 minutes to acquire a

signal. This should not be the case with subsequent uses.

Why does it take so long to find the satellites

When the GPS unit is first initialized it can take several minutes for the receiver to locate

the satellites in orbit. Be sure that the GPS receiver has an unobstructed view of the sky.

What do I do if the computer will not recognize my voice commands?

First make sure the necessary speech software is installed. From the Windows

Start

menu,

go to

Settings/Control Panel

, then

Add/Remove Programs

, and check for Watson on the

list in the Install/Uninstall tab. If it is not there, you will need to uninstall/reinstall CoPilot,

being sure to click

when prompted to install the speech software. Next, in Planning

Mode go to the

Edit

menu. Select

Preferences

and then select

Speech

. Make sure the

boxes next to

Listen for voice commands

and

Speak feedback out loud

are both checked.

I have two hard drives and would like to install the Data to my second hard drive.

How do I do this?

Note:

For the instructions below, C represents your first hard drive and D represents your

second hard drive.

Once CoPilot has been installed on the first hard drive (C) follow these simple instructions:

1. Insert a Data CD (East or West) into the CD-ROM drive.

2. Double click on My Computer

3. Double Click on your CD-ROM drive.

4. Double click on the Install folder.

Содержание CoPilot 2002

























































Результаты поиска

Содержание CoPilot 2002

Отзывы:

Похожие инструкции для CoPilot 2002

Бренды по названию

Популярные бренды

TravRoute CoPilot 2002, Руководство пользователя

Результаты поиска

Содержание CoPilot 2002

Отзывы:

Похожие инструкции для CoPilot 2002

Бренды по названию

Популярные бренды