TravRoute CoPilot 2002 Скачать руководство пользователя | Manualshive

Страница: 17 / 56

background image

- 13 -

Guidance Mode

Start Navigating

If your GPS receiver is attached you're ready to start driving! The CoPilot navigation

system will guide you to the destination(s) you enter, and recalculate your route should you

miss a turn.

Because CoPilot needs to know where you're going in order to give you navigation advice,

you must enter a destination. (You do not need to enter an origin. If your GPS receiver is

picking up signals, CoPilot will automatically fill in the start place.) In Guidance Mode, the

Passenger screen will open and a highlighted route will appear on the map that starts at your

current position, and ends at your next stop. Your route will also be tracked on the map

while you drive.

NOTE

: If

Driver

is set in the control panel, the Driver Safety screen will appear at more

than 10 m.p.h., but CoPilot voice technology will remain active and you'll receive simple

turn instructions on the screen.

If you deviate far enough from your pre-planned route (you might make a wrong turn or

choose to follow your own variation of the route), CoPilots "dynamic directions" will

automatically recalculate a new path to your destination from your current position.

Navigating With a Pre-calculated Route and Dynamic Directions

1.

Enter a destination, with or without a street address. You may enter intermediate

stops before entering a destination if you like -- CoPilot will route you to each

stop, beginning with the stop that was entered last.

In the Passenger screen, the control panel will be visible to the right of the map.

You'll see your highlighted route drawn on the map from your current position to

the destination you entered.

2.

Start driving!

As your GPS unit receives signals, arrows will appear on the map

beginning at your start place and track you as you drive. CoPilot will automatically

prompt you and tell you when your next turn is coming up. If you go off route,

CoPilot's "dynamic directions" will reroute you to the next stop from your

current position.

«
...
15
16
17
18
19
...
»

Содержание CoPilot 2002

























































Отзывы:

Нет отзывов

Похожие инструкции для CoPilot 2002

Бренд: Cadillac Страницы: 4

Бренд: Cadillac Страницы: 107

Бренд: Metra Electronics Страницы: 16

VM9212N - Multimedia CD/DVD Receiver

Бренд: Jensen Страницы: 32

COMAND AND REAR-CABIN AUDIOVISUAL SYSTEM

Бренд: MAYBACH Страницы: 319

Бренд: Medion Страницы: 96

Бренд: Delphi Страницы: 12

Бренд: Sound Storm Страницы: 26

Бренд: ASA Electronics Страницы: 2

Бренд: Nakamichi Страницы: 11

Бренд: Autopot Страницы: 2

BMW Motorrad Navigator VI

Бренд: Garmin Страницы: 20

Бренд: Graco Страницы: 20

Бренд: Alpine Страницы: 57

Бренд: Alpine Страницы: 148

Бренд: VDO Страницы: 4

Бренд: Xomax Страницы: 39

Бренд: Logic Страницы: 23

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды