TRAPP 17.5 HP, Инструкция по эксплуатации

Страница: 121 / 164

ENGLISH
121
www.trapp.com.br
Mounting the mower deck
The models with a 46-inch (117 cm) mower deck
come uncoupled from the tractor. To mount the
mower deck, park the tractor on a level surface and
follow these steps:
1. Position the mower deck on the right side of the
tractor and turn the handwheel all the way to the
left to facilitate assembly, as shown in Image 4;
Image
4
2. Engage the parking brake and move the cut height
adjustment lever to the lowest position;
Beware!
The mowing height adjustment lever has a
spring effect. Hold this lever firmly, lower it
slowly and snap it into its lowest position.
3. Place the belt forward and check that the track
is suitable for all channels of the mower deck
pulleys, as shown in Image 5;
Image 5
4. Slide the mower deck carefully until it is centered
under the tractor;
5. Carefully attach the PTO cable (A) to the bracket
located at the rear of the mower deck with the
securing clip and attach the spring to the mower deck
support, as shown in Image 6;
A
Image 6
6. Carefully adjust the mower deck by sliding it
for fastening of the rod (B) to the tractor bracket,
snapping it in place and securing it with a catch, as
shown in Image 7;
B
Image 7
7. Position the bracket (C) of the mower deck on the
tractor lift bracket (D), as shown in Image 8, and then
slide the pin through the two brackets, securing them
with a bracket;