Chapter 19: Integration with Enterprise Equipment
TR0190 Rev. B1
122
19.1.2
Configuring Splash URLs
The URL that a user is redirected to for login purposes can be individually configured for each
client access interface that supports splash pages (wlan1-4). URLs for successful login, failed
login, and error conditions can also be specified for each interface.
The ‘login URL’ parameter sets the URL that a user is redirected to when they attach to the
interface and have not yet been authenticated. This parameter should not be left blank if
splash pages are enabled for the interface. No client device would be able to access the
network through the interface if splash pages are enabled and the login URL parameter does
not point to a valid URL.
The ‘success URL’ parameter sets the URL that a user is redirected to when they have
successfully logged in. If this variable is left blank, a default page that indicates login success
will be displayed.
The ‘fail URL’ parameter sets the URL that a user is redirected to when a login attempt fails. If
this variable is left blank, a default page that indicates login failure will be displayed.
The ‘error URL’ parameter sets the URL that a user is redirected to when a login error has
occurred. For example, this page would be displayed if a valid authentication server could not
be reached. If this variable is left blank, a default page that indicates an error has occurred will
be displayed.
CLI
In the examples that follow, <intf> represents any of the client access interfaces ‘wlan1’,
‘wlan2’, ‘wlan3’, or ‘wlan4’. The ‘splash.url.<intf>.login’ parameters in the ‘sys’ interface set the
login URLs. The ‘splash.url.<intf>.success’ parameters in the ‘sys’ interface set the success
URLs. The ‘splash.url.<intf>.fail’ parameters in the ‘sys’ interface set the fail URLs. The
‘splash.url.<intf>.error’ parameters in the ‘sys’ interface set the error URLs
The example below shows how the ‘wlan1’ and ‘wlan2’ interfaces can be set to use different
URLs for the login process.
>
use sys
sys>
set splash.url.wlan1.login=http://server.domain.com/wlan1_login.htm
sys>
set splash.url.wlan1.success=http://server.domain.com/wlan1_success.htm
sys>
set splash.url.wlan1.fail=http://server.domain.com/wlan1_fail.htm
sys>
set splash.url.wlan1.error=http://server.domain.com/wlan1_error.htm
sys>
set splash.url.wlan2.login=http://server.domain.com/wlan2_login.htm
sys>
set splash.url.wlan2.success=http://server.domain.com/wlan2_success.htm
sys>
set splash.url.wlan2.fail=http://server.domain.com/wlan2_fail.htm
sys>
set splash.url.wlan2.error=http://server.domain.com/wlan2_error.htm
Содержание EL-500
Страница 20: ...Chapter 3 Using the Web Interface TR0190 Rev B1 20 Figure 8 Rebooting the EL 500...
Страница 33: ...Chapter 5 Initial Configuration of an ER 1000 TR0190 Rev B1 33 Figure 9 Initial configuration web page...
Страница 68: ...Chapter 11 Ethernet Interface Configuration TR0190 Rev B1 68 Figure 38 Wired DHCP settings...
Страница 108: ...Chapter 16 Controlling Access to the ER 1000 TR0190 Rev B1 108 Figure 50 VAP ACL configuration...
