Chapter 9: System Settings
TR0190 Rev. B1
53
CLI
The geographic location of the EL-500 can be stored in the following fields in the ‘sys’
interface:
•
sys.location.gps.altitude
•
sys.location.gps.latitude
•
sys.location.gps.longitude
For example, you can set the latitude value as follows.
>
use sys
sys>
set location.gps.latitude=”34.01”
A description of the EL-500’s location can be stored in the ‘location.postal’ field in the ‘sys’
interface. For example, you can set the location value as shown below.
>
use sys
sys>
set location.postal=”Light post near 123 Main St., Anytown, CA”
Web GUI
The location information can be set via the web interface using the “Location” tab on the
“System Parameters” page.
Figure 29. Setting location and certificate information
Содержание EL-500
Страница 20: ...Chapter 3 Using the Web Interface TR0190 Rev B1 20 Figure 8 Rebooting the EL 500...
Страница 33: ...Chapter 5 Initial Configuration of an ER 1000 TR0190 Rev B1 33 Figure 9 Initial configuration web page...
Страница 68: ...Chapter 11 Ethernet Interface Configuration TR0190 Rev B1 68 Figure 38 Wired DHCP settings...
Страница 108: ...Chapter 16 Controlling Access to the ER 1000 TR0190 Rev B1 108 Figure 50 VAP ACL configuration...
