TransVu Compact Скачать руководство пользователя страница 73

Страница: 73 / 150

www.transvu.co.uk

Configuration & Operation Guide

Zone Input

This menu allows the configuration of established alarm zones. A single or multiple trigger can be

used to generate an alarm. It is possible to allocate up to 32 alarm zones to carry out a combination

of actions. Use these options in conjunction with the Zone Actions menu.

Entry timer

This is the number of seconds allowed for the user to enter the zone and

disable the alarms. If the alarm is not disabled within this period the alarm will

be triggered.

Exit timer

This is the number of seconds from the alarm being set within which the user

must exit the set zone. If the user is still within the zone after this time period the

alarm will be triggered.

Zone

An alarm zone can be established to logically groups alarms and initiate actions

when an alarm is activated, there are 32 configurable zones.

Title

This information is stored along with the relevant images in the database,

ensure this has relevance to the alarm zone.

Pre-Alarm sec

This is the time period prior to the start of the alarm included with the alarm

recording for archive. These images will also be protected from being

overwritten.

Note: It is recommended that the Pre-Alarm option be set to the same value as the Pre-Trigger setting in

the “Profile Record“ menu. This will ensure successful playback of high quality Pre-Trigger images.

High quality pre-trigger images will only playback properly if review (playback) starts prior to the

pre-trigger initiation.

Alarm Duration sec

This is the minimum time period in seconds (from the start of the alarm) that

is protected from being overwritten. This time will include the alarm trigger,

the pulse extension and any post alarm recording. It will not include pre-alarm

images.

Содержание Compact























































































































































Результаты поиска

Содержание Compact

Отзывы:

Похожие инструкции для Compact

Бренды по названию

Популярные бренды

TransVu Compact, Руководство по конфигурации и эксплуатации

Результаты поиска

Содержание Compact

Отзывы:

Похожие инструкции для Compact

Бренды по названию

Популярные бренды