TransVu Compact
50
Telemetry
If a telemetry capable camera is connected, the appropriate control
protocol should be selected from the accompanying drop down list,
refer to
‘Appendix G’ for details of supported
telemetry protocols.
Default to preset
If a telemetry camera has been assigned a preset position, select the chosen
preset position here. Enter the time period (in minutes) of inactivity which will
result in the camera moving to its preset position,
refer to Viewer menus-
>Program Page for guidance on assigning camera presets
.
after X mins
Refer to ‘Default to preset’.
Note: The following settings will change depending on the type of camera connected.
If a Local Analog Camera is selected
Colour
Select a colour value from -8 to +8 via the slidebar or enter a number directly
into the accompanying textbox.
Brightness
Select a contrast value from -8 to +8 via the slidebar or enter a number directly
into the accompanying textbox.
IP Camera
If a NetVu Connected IP Source is selected
IP Type
Select the type of NetVu Connected source the camera stream is originating
from. Select from:
‘NetVu Server’ - i.e. DVIP Server, DVIP RT, SD,
SD Advanced, EcoSense.
‘NetVu Gen 2’ - i.e. DS2, BX2.
NetVu Camera’ - i.e. the CamVu 2000 from Dedicated Micros.