Transition Networks S4224 Скачать руководство пользователя страница 614

Страница: 614 / 669

Transition Networks

S4224 Web User Guide

33558 Rev. C

https://www.transition.com

Page 614 of 669

this file does not by itself cause the resulting work to be covered by

the GNU General Public License. However the source code for this file

must still be made available in accordance with section (3) of the GNU

General Public License v2.

This exception does not invalidate any other reasons why a work based

on this file might be covered by the GNU General Public License.

Name libfetch

Description

A library for retreiving and uploading files using Uniform Resource Locators (URLs).

License type

Modified BSD

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions

are met:

1. Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer

in this position and unchanged.

2. Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

3. The name of the author may not be used to endorse or promote products

derived from this software without specific prior written permission

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR

IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,

INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT

NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT

(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF

THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Содержание S4224






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание S4224

Отзывы:

Похожие инструкции для S4224

Бренды по названию

Популярные бренды

Transition Networks S4224, Руководство пользователя для веб

Результаты поиска

Содержание S4224

Отзывы:

Похожие инструкции для S4224

Бренды по названию

Популярные бренды