Transition Networks S4224 Скачать руководство пользователя страница 138

Страница: 138 / 669

Transition Networks

S4224 Web User Guide

33558 Rev. C

https://www.transition.com

Page 138 of 669

NAS-IP-Address

(Attribute 4)

The IPv4 address to be used as attribute 4 in RADIUS Access-Request packets. If this field is left

blank, the IP address of the outgoing interface is used. Must be a valid IP v4 address in dotted

decimal notation (“x.y.z.w”), where x, y, z, and w are decimal numbers between 0 and 255.

NAS-IPv6-Address

(Attribute 95)

The IPv6 address to be used as attribute 95 in RADIUS Access-Request packets. If this field is

left blank, the IP address of the outgoing interface is used. Must be a valid IPv6 address in 128-

bit records represented as eight fields of up to four hexadecimal digits with a colon (



separating

each field.

NAS-Identifier

(Attribute 32)

The identifier - up to 253 characters long - to be used as attribute 32 in RADIUS Access-Request

packets. If this field is left blank, the NAS-Identifier is not included in the packet.

Server Configuration

The table has one row for each RADIUS server and a number of columns, which are:

Delete

To delete a RADIUS server entry, check this box. The entry will be deleted during the next Save.

Hostname

The IP address or hostname of the RADIUS server. Must be unique if configuring multiple

servers.

Auth Port

The UDP port to use on the RADIUS server for authentication. Must be unique if configuring

multiple servers.

Acct Port

The UDP port to use on the RADIUS server for accounting. Must be unique if configuring multiple

servers.

Timeout

This optional setting overrides the global timeout value. Leaving it blank will use the global

timeout value.

Retransmit

This optional setting overrides the global retransmit value. Leaving it blank will use the global

retransmit value.

Key

This optional setting overrides the global key. Leaving it blank will use the global key.

Buttons

Save

: Click to save changes.

Reset

: Click to undo any changes made locally and revert to previously saved values.

Add New Server

Click to add a new RADIUS server. An empty row is added to the table, and the

RADIUS server can be configured as needed. Up to 5 servers are supported. The

Delete

button can be

used to undo the addition of the new server.

Содержание S4224






























































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание S4224

Отзывы:

Похожие инструкции для S4224

Бренды по названию

Популярные бренды

Transition Networks S4224, Руководство пользователя для веб

Результаты поиска

Содержание S4224

Отзывы:

Похожие инструкции для S4224

Бренды по названию

Популярные бренды