TransCore AI1422E Скачать руководство пользователя страница 37

Страница: 37 / 102

Chapter 6 Commands

The AI1422E Reader is delivered from the factory with specified default settings that determine how the

reader operates. Commands transmitted by the host computer can change the default settings and control

additional features. The commands can be transmitted by manually entering the commands at the host

keyboard if the host is in terminal emulation mode.

Note: If you are using Wiegand mode, you must connect the PC or laptop to the AI1422E Reader

using the RS–232 or RS–422 interface and a terminal emulation program to send commands to the

reader. You can leave the Wiegand interface connected during this procedure.

Operating Modes

The AI1422E Reader has three modes of operation: Data Mode, Command Mode, and Download Mode.

The software for the AI1422E Reader contains two separate programs — Boot and Application. The Boot

program has control of the AI1422E Reader on startup and when operating in download mode. The

Application program has control of the AI1422E Reader during a command mode operation and holds the

application code. Together, they control the AI1422E Reader in the three modes of operation.

Data Mode

The AI1422E Reader is in Data Mode on power-up. While in Data Mode, the AI1422E Reader sends all

communications to the host computer as data messages, such as tag IDs and reports. Reports provide

information on Input 0 and Input 1 status changes, a presence without tag report, and buffer overflow

information. The host computer can send only four commands to the AI1422E Reader while in Data Mode

(

Table 1).

Table 1 Data Mode Commands

Data Mode Commands

Type

Description

Command

Status Request

Causes the interrogator to respond with a message

containing information indicating the rolling transponder

seen count and the count of host error messages.

~~@@

Retransmit Request

Requests the interrogator to retransmit the last tag ID

read. (BB must be entered in upper case).

~~BB

Enter Command Mode

Disables reading and reporting of tags and changes

the reader from Data Mode to Command Mode. (CC

must be entered in upper case). Refer to

”Switch to

Command Mode” on page 6–27.

~~CC

Enter Command Mode Disables reading and reporting of tags and changes the

reader from Data Mode to Command Mode.

!01

There is no carriage return or line feed required for any of the

commands. Commands

!01

require a

carriage return.
No Response is received with the

~~CC

and

!01

commands.

Chapter 6 Commands

TransCore Proprietary

6–21

Содержание AI1422E







































































































Результаты поиска

Содержание AI1422E

Отзывы:

Похожие инструкции для AI1422E

Бренды по названию

Популярные бренды

TransCore AI1422E, Руководство пользователя

Результаты поиска

Содержание AI1422E

Отзывы:

Похожие инструкции для AI1422E

Бренды по названию

Популярные бренды