TransAct POSJET 1500, Руководство программиста

Страница: 175 / 294

Programmer's Guide POSjet
®
1500 Codes and Commands
Nov-07 Rev M Page 161
Function: Set Validation Operation
ASCII: [ESC] ~ 0 <n>
Hex:
1BH 7EH 30H
Decimal:
<27><126><48>
Description:
This command reconfigures the operation of the right form sensor during validation.
Where n =
76543210
Bit values
xxxxxx00
Right form sensor is required for the form to be sensed and must be valid when
the form is fully loaded.
xxxxxx01
Right form sensor is not required for the form to be sensed but must be valid
when the from is fully loaded.
xxxxxx10
Right form sensor is not used.
xxxxxx11
Reserved.
Note: This command remains in effect until it is reset by a power cycle. It does not alter the default
configuration.