Trane Voyager TC Series, Руководство пользователя

Страница: 72 / 108

72
RT-PRC024-EN
ReliaTel™ Controlled
Units
Zone Sensors are the building
occupant’s comfort control devices.
They replace the conventional
electro-mechanical thermostats. The
following zone sensor options are
available for Voyager units with
ReliaTel control:
Differential Enthalpy
Replaces the standard dry bulb
control with two enthalpy sensors
that compare total heat content of
the indoor air and outdoor air to
determine the most efficient air
source. This control option offers the
highest level of comfort control, plus
energy efficiency, available.
Differential Pressure Switches
This factory or field-installed option
allows individual fan failure and dirty
filter indication. The fan failure
switch will disable all unit functions
and “flash” the Service LED on the
zone sensor. The dirty filter switch
will light the Service LED on the zone
sensor and will allow continued unit
operation.
Digital Display Zone Sensor
The Digital
LCD (Liquid
Crystal
Display) zone
sensor has the
look and
functionality
of standard
zone sensors.
This sensor
includes a
digital display
of set point
adjustment and space temperature
in F (Fahrenheit) or C (Celsius).
Includes FAN and SYSTEM buttons
(supports the service functions of the
standard sensor). E-squared
memory stores last programmed set
points. Requires 24 VAC (Volts AC).
This sensor should be utilized with
ReliaTel™ controls.
Dual Thermistor Remote Zone
Sensor
This sensor will allow the customer
to reduce the total number of remote
sensors to obtain space temperature
averaging. This sensor should be
utilized with ReliaTel controls.
Economizer Controls
The standard equipment offering is a
fixed dry bulb changeover control. In
addition, there are two optional
controls, Enthalpy and Differential
Enthalpy Control.
Enthalpy Control
Replaces the dry bulb control with a
wet bulb changeover controller
which has a fully adjustable set
point. Enthalpy control offers a
higher level of comfort control, along
with energy savings potential, than
the standard dry bulb control. This is
due to the additional wet bulb
sensing capability.
Integrated Comfort™ System
Sensor(s)
available with
optional
temperature
adjustment
and override
buttons to
provide central
control
through a
Trane
Integrated
Comfort™ system.
Manual Changeover
Heat, Cool or Off
System Switch.
Fan Auto or Off
Switch. One
temperature
setpoint lever.
Manual/Automatic Changeover
Auto, Heat, Cool
or Off System
Switch. Fan
Auto or Off
Switch. Two
temperature
setpoint levers.
Optional Status
Indication LED
lights, System
On, Heat, Cool,
or Service.
Programmable Night Setback
Auto or manual changeover with
seven-day programming. Keyboard
selection of Heat, Cool, Fan, Auto, or
On. All programmable sensors have
System On, Heat, Cool, Service LED/
indicators as standard. Night Setback
Sensors have one (1) Occupied, one
(1) Un-occupied, and two (2)
Override programs per day.
Remote Sensor
Sensor(s) available for all zone
sensors to provide remote sensing
capabilities.
Remote Potentiometer
Minimum position setting of
economizer can be remotely
adjusted with this accessory.
MODE
Mo Mo
PM PM
OCCUPIED OCCUPIED
MODE
AUTO
FAN
AUTO
Controls