BAS-SVN208G-EN
15
Step 13: System Controller Setup
Custom Graphics
All graphics for Tracer Concierge must be custom graphics. Tracer Concierge will not
show standard or template graphics.
Order Custom Graphics from Centralized Graphics. On the Graphics Order Sheet, check
the Tracer Concierge box, so the graphics are suitable for Tracer 10-inch Display.
Graphics should be 1280x720 resolution.
• Graphic names will appear on the Tracer 10-inch Display, so name graphics suitably.
• Name graphics with 24 characters or less. There is not a fixed limit on name length,
but longer names will not display well in Tracer Concierge.
• Give graphics descriptive names. For example, First Floor Temps.
• Add property references, such as:
•
Temperatures
•
Flood Fill for floorplans
•
Setpoints. As a best practice, use the new setpoint widget that looks like the main
screen.
•
Overrides. As a best practice, use the new override widget that looks like the
main screen.
• System Controller graphic navigation buttons are not supported in Tracer
Concierge. Instead, use target or link.
Best practices for custom graphics
• Limit or do not use navigation between custom graphics. Each graphic will appear
in the menu.
• No external links to the web.
• No links to stock System Controller web pages, such as Building Summary, Status
screens, Alarms, Schedules, and Data Logs. These links will be disabled on the
Tracer 10-inch Display screen.
• Use the new setpoint and override widgets.
• Avoid elements better suited for the System Controller web interface: binary toggle,
list box, setpoint box, override buttons, and navigation buttons.
Figure 13.
Setpoint and override widgets
• Check the point references by using
Utilities
|
Resolve Graphic
to ensure there are
not template point references.
•
Verify the points are referenced properly.
•
Verify all points have a specific Object Name and that none are left with
Default
as the Object Name. Except for navigation objects, which may be left at default.
Important:
Any graphic that has a point with
Default
as the Object Name will not be
shown on the display.
