27
BAS-SVX084A-EN
Controller LEDs
This section describes how to verify and interpret the Symbio 210 controller LEDs and safely
operate the controller. LEDs are used to provide controller serviceability. The Symbio 210 controller
has the following LEDs located on the front (refer to
Figure 9
, and
Table 9, p. 27
):
•
Marquee LED
•
Communication status LEDs and IMC status LEDs
•
Service button LED
•
Five (5) TRIAC status LEDs
For details about wiring communication links, refer to the
BACnet Best Practices and
Troubleshooting Guide (BAS-SVX51-EN)
.
Figure 10.
BACnet MS/TP Controller LEDs
