4
A
Chapter
B
Sequence of paragraphs
C Preliminary precautions
D Operations
1.1
Preliminary precautions
These units must be installed by a qualified company that at the end of the work provides
the operator with a declaration of conformity with the regulations in force and the
instructions provided by in this document.
These units must comply with their intended use in line with their performance
characteristics.
Wear suitable and accident prevention clothing and equipment during installation and/or
maintenance. The manufacturer declines any liability for non-compliance with safety and
accident prevention regulations in force.
All unit installation, connection, start-up and shut-down operations must only be
implemented by qualified and authorised personnel.
Comply with the laws in force in the country where the machine is installed, concerning
the use and disposal of the packaging, the products used for cleaning and maintenance
and for the management when the unit life cycle is complete.
Any repairs or maintenance must be performed by the technical support of the
manufacturer or by qualified personnel, in accordance with this document.
Preferably use original spare parts when replacing components.
If the outdoor or installation environment temperature can drop below zero, there is a
freezing hazard and the heating water system must be drained or anti-freeze added.
The manual is divided into chapters as follows:
-
General;
-
Shipment;
-
Installation;
-
Water connections;
-
Electrical connections:
-
Commissioning;
-
Control;
-
Maintenance.
•
The preliminary precautions must be read before performing any of the following operations.
This document uses the following definitions:
-
Danger zones: any area inside and/or near the machine in which the presence of an
exposed person constitutes a risk to his/her own health and safety.
-
Exposed person: any person who is entirely or partially in a danger zone.
-
Operator/Maintenance Technician: the person/s assigned to operate, adjust, service, repair
or move the machine.
1.2
Document information
1.
General
1.1
Preliminary precautions
1.2
Document information
1.3
Range
1.4
Accessories
1.5
Compliance
1.6
Machine identification
1.7
Intended use
1.8
General precautions
1.9
Basic safety rules
1.10
Residual risk
1.11
User guidelines
1.12
Machine description